<
Home
feco المعدنية حيث لشراء

feco المعدنية حيث لشراء

  • FeCo纳米线–锶铁氧体粉末复合材料,用于具有高能产品的 ...

    2020年9月11日  由于与稀土元素相关的问题,强烈需要具有在铁氧体和稀土磁体之间的性能的磁体,以在选定的应用中替代后者。在这里,我们通过将FeCo纳米线粉末与六价铁氧体颗粒混合来生产高剩磁化复合粘结磁体。2016年12月2日  The relatively large size of FeCo particles reduces the influence of surface oxidation on the particle magnetic properties. The low-cost chemical technology developed is promising for a large-scale production of small FeCo magnetic components of arbitrary shapes with high-dimensional precision.Microstructure and Magnetic Properties of Bulk FeCo Alloys 2021年12月23日  结果:发现FeCo纳米颗粒的形状根据金属前驱体的原子比从片状到立方体变化。 X 射线衍射 (XRD) 数据表明,制备的不同成分的样品得到单相体心立方结构的 FeCo 合金。FeCo纳米颗粒的形态可控合成及其磁性,Current Nanoscience ...

  • Fe-Co合金纳米颗粒的制备与磁性能研究 - 百度学术

    Fe-Co合金因具有高的饱和磁化强度,高居里温度,高磁导率,低矫顽力以及低磁各向异性常数等独特的软磁性能而倍受关注.当Fe-Co合金颗粒尺寸为纳米级时,由于纳米颗粒的表面效应,小尺寸效应,量子尺寸效应以及宏观量子隧道效应等,其多种电磁特性以及物理特性将会 ...2021年4月1日  A seven-component (FeCo) x BSiVCuY amorphous/nanocrystalline alloy system with high ferromagnetic element contents (x = 85, 86 and 87, at atomic percent) was synthesized by rapid quenching method. The microstructure, crystal structure, magnetic property and crystallization behavior were systematically investigated.FeCo-based amorphous alloys with high ferromagnetic 2023年11月4日  扫描电子显微镜 (SEM) 图像表明,Fe:Co 进料比为 1:0 和 3:1 制备的颗粒表现为立方体颗粒,尺寸分别约为 200 nm 和 100 nm。 以 1:1 Fe:Co 比例合成的颗粒呈现出金字塔状形状,并伴有小的尖晶石结构。 相比之下,用 3:1 和 9:1 Fe:Co 投料比制备的颗粒呈现出花状形态,粒径约为 10 µm,而使用纯钴盐合成的颗粒呈现棕榈叶状外观。 此外, 具有受控双金属成分的磁性 FeCo 颗粒的表征,Journal of ...

  • FeCo alloy encapsulated in N-doped carbon shell for

    2023年6月15日  FeCo alloy encapsulated in N-doped carbon shell is synthesized through high temperature pyrolysis of ZIF-L with the assistance of different Fe salts. XRD results indicate that FeCo alloys are formed with the presence of FeCl 3 6H 2 O, FeSO 4 7H 2 O, Fe(NH 4) 2 (SO 4) 2 6H 2 O and (NH 4) 3 Fe(C 2 O 4) 3 3H 2 O during the pyrolysis2023年7月10日  Thereinto, the FeCo-MOF/MWCNTs sensor displays excellent detection performance with a wide linear detection range (5∼5000 μM), outstanding selectivity and a detect limitation of 1.68 μM for nitrite. These superior findings provide new potentials application for the inspection of nitrite in environmental monitor. Previous article in issue.Bimetallic FeCo metal-organic-frameworks anchored multi 2024年3月14日  所有三个样品表现出典型的软磁曲线,具有高饱和磁化强度和低矫顽力。与FeCo-200和FeCo-600相比,多孔FeCo-400合金表现出最高的饱和磁化强度(231.42emug-1)和矫顽力(199.45Oe)。FeCo-400较高的饱和磁化强度可归因于多壳结构。复旦大学,最新Advanced Materials!_结构_FeCo_相互作用

  • 稀土元素对FeCo合金微观组织及磁性能的影响 科研之友

    2019年7月18日  通过SEM和VSM等测试分析手段对添加稀土元素对FeCo合金的微观组织和磁性能影响作了系统研究。 结果表明,稀土元素的添加会在基体相周围形成富稀土相,当含量较高时还会出现过渡相。2020年9月11日  由于与稀土元素相关的问题,强烈需要具有在铁氧体和稀土磁体之间的性能的磁体,以在选定的应用中替代后者。在这里,我们通过将FeCo纳米线粉末与六价铁氧体颗粒混合来生产高剩磁化复合粘结磁体。FeCo纳米线–锶铁氧体粉末复合材料,用于具有高能产品的 ...2016年12月2日  The relatively large size of FeCo particles reduces the influence of surface oxidation on the particle magnetic properties. The low-cost chemical technology developed is promising for a large-scale production of small FeCo magnetic components of arbitrary shapes with high-dimensional precision.Microstructure and Magnetic Properties of Bulk FeCo Alloys

  • FeCo纳米颗粒的形态可控合成及其磁性,Current Nanoscience ...

    2021年12月23日  结果:发现FeCo纳米颗粒的形状根据金属前驱体的原子比从片状到立方体变化。 X 射线衍射 (XRD) 数据表明,制备的不同成分的样品得到单相体心立方结构的 FeCo 合金。Fe-Co合金因具有高的饱和磁化强度,高居里温度,高磁导率,低矫顽力以及低磁各向异性常数等独特的软磁性能而倍受关注.当Fe-Co合金颗粒尺寸为纳米级时,由于纳米颗粒的表面效应,小尺寸效应,量子尺寸效应以及宏观量子隧道效应等,其多种电磁特性以及物理特性将会 ...Fe-Co合金纳米颗粒的制备与磁性能研究 - 百度学术2021年4月1日  A seven-component (FeCo) x BSiVCuY amorphous/nanocrystalline alloy system with high ferromagnetic element contents (x = 85, 86 and 87, at atomic percent) was synthesized by rapid quenching method. The microstructure, crystal structure, magnetic property and crystallization behavior were systematically investigated.FeCo-based amorphous alloys with high ferromagnetic

  • 具有受控双金属成分的磁性 FeCo 颗粒的表征,Journal of ...

    2023年11月4日  扫描电子显微镜 (SEM) 图像表明,Fe:Co 进料比为 1:0 和 3:1 制备的颗粒表现为立方体颗粒,尺寸分别约为 200 nm 和 100 nm。 以 1:1 Fe:Co 比例合成的颗粒呈现出金字塔状形状,并伴有小的尖晶石结构。 相比之下,用 3:1 和 9:1 Fe:Co 投料比制备的颗粒呈现出花状形态,粒径约为 10 µm,而使用纯钴盐合成的颗粒呈现棕榈叶状外观。 此外, 2023年6月15日  FeCo alloy encapsulated in N-doped carbon shell is synthesized through high temperature pyrolysis of ZIF-L with the assistance of different Fe salts. XRD results indicate that FeCo alloys are formed with the presence of FeCl 3 6H 2 O, FeSO 4 7H 2 O, Fe(NH 4) 2 (SO 4) 2 6H 2 O and (NH 4) 3 Fe(C 2 O 4) 3 3H 2 O during the pyrolysisFeCo alloy encapsulated in N-doped carbon shell for 2023年7月10日  Thereinto, the FeCo-MOF/MWCNTs sensor displays excellent detection performance with a wide linear detection range (5∼5000 μM), outstanding selectivity and a detect limitation of 1.68 μM for nitrite. These superior findings provide new potentials application for the inspection of nitrite in environmental monitor. Previous article in issue.Bimetallic FeCo metal-organic-frameworks anchored multi

  • 复旦大学,最新Advanced Materials!_结构_FeCo_相互作用

    2024年3月14日  所有三个样品表现出典型的软磁曲线,具有高饱和磁化强度和低矫顽力。与FeCo-200和FeCo-600相比,多孔FeCo-400合金表现出最高的饱和磁化强度(231.42emug-1)和矫顽力(199.45Oe)。FeCo-400较高的饱和磁化强度可归因于多壳结构。2019年7月18日  通过SEM和VSM等测试分析手段对添加稀土元素对FeCo合金的微观组织和磁性能影响作了系统研究。 结果表明,稀土元素的添加会在基体相周围形成富稀土相,当含量较高时还会出现过渡相。稀土元素对FeCo合金微观组织及磁性能的影响 科研之友2020年9月11日  由于与稀土元素相关的问题,强烈需要具有在铁氧体和稀土磁体之间的性能的磁体,以在选定的应用中替代后者。在这里,我们通过将FeCo纳米线粉末与六价铁氧体颗粒混合来生产高剩磁化复合粘结磁体。FeCo纳米线–锶铁氧体粉末复合材料,用于具有高能产品的 ...

  • Microstructure and Magnetic Properties of Bulk FeCo Alloys

    2016年12月2日  The relatively large size of FeCo particles reduces the influence of surface oxidation on the particle magnetic properties. The low-cost chemical technology developed is promising for a large-scale production of small FeCo magnetic components of arbitrary shapes with high-dimensional precision.2021年12月23日  结果:发现FeCo纳米颗粒的形状根据金属前驱体的原子比从片状到立方体变化。 X 射线衍射 (XRD) 数据表明,制备的不同成分的样品得到单相体心立方结构的 FeCo 合金。FeCo纳米颗粒的形态可控合成及其磁性,Current Nanoscience ...Fe-Co合金因具有高的饱和磁化强度,高居里温度,高磁导率,低矫顽力以及低磁各向异性常数等独特的软磁性能而倍受关注.当Fe-Co合金颗粒尺寸为纳米级时,由于纳米颗粒的表面效应,小尺寸效应,量子尺寸效应以及宏观量子隧道效应等,其多种电磁特性以及物理特性将会 ...Fe-Co合金纳米颗粒的制备与磁性能研究 - 百度学术

  • FeCo-based amorphous alloys with high ferromagnetic

    2021年4月1日  A seven-component (FeCo) x BSiVCuY amorphous/nanocrystalline alloy system with high ferromagnetic element contents (x = 85, 86 and 87, at atomic percent) was synthesized by rapid quenching method. The microstructure, crystal structure, magnetic property and crystallization behavior were systematically investigated.2023年11月4日  扫描电子显微镜 (SEM) 图像表明,Fe:Co 进料比为 1:0 和 3:1 制备的颗粒表现为立方体颗粒,尺寸分别约为 200 nm 和 100 nm。 以 1:1 Fe:Co 比例合成的颗粒呈现出金字塔状形状,并伴有小的尖晶石结构。 相比之下,用 3:1 和 9:1 Fe:Co 投料比制备的颗粒呈现出花状形态,粒径约为 10 µm,而使用纯钴盐合成的颗粒呈现棕榈叶状外观。 此外, 具有受控双金属成分的磁性 FeCo 颗粒的表征,Journal of ...2023年6月15日  FeCo alloy encapsulated in N-doped carbon shell is synthesized through high temperature pyrolysis of ZIF-L with the assistance of different Fe salts. XRD results indicate that FeCo alloys are formed with the presence of FeCl 3 6H 2 O, FeSO 4 7H 2 O, Fe(NH 4) 2 (SO 4) 2 6H 2 O and (NH 4) 3 Fe(C 2 O 4) 3 3H 2 O during the pyrolysisFeCo alloy encapsulated in N-doped carbon shell for

  • Bimetallic FeCo metal-organic-frameworks anchored multi

    2023年7月10日  Thereinto, the FeCo-MOF/MWCNTs sensor displays excellent detection performance with a wide linear detection range (5∼5000 μM), outstanding selectivity and a detect limitation of 1.68 μM for nitrite. These superior findings provide new potentials application for the inspection of nitrite in environmental monitor. Previous article in issue.2024年3月14日  所有三个样品表现出典型的软磁曲线,具有高饱和磁化强度和低矫顽力。与FeCo-200和FeCo-600相比,多孔FeCo-400合金表现出最高的饱和磁化强度(231.42emug-1)和矫顽力(199.45Oe)。FeCo-400较高的饱和磁化强度可归因于多壳结构。复旦大学,最新Advanced Materials!_结构_FeCo_相互作用2019年7月18日  通过SEM和VSM等测试分析手段对添加稀土元素对FeCo合金的微观组织和磁性能影响作了系统研究。 结果表明,稀土元素的添加会在基体相周围形成富稀土相,当含量较高时还会出现过渡相。稀土元素对FeCo合金微观组织及磁性能的影响 科研之友

  • “خدمة الرعاية لدينا ، تصنيع سعر القلب الدقيق ، العملاء في سهولة.”

    Go to Top